Launch offer: use QUADCORE10 for 10% off QuadCore. Limited to the first 25 orders that redeem the code.
QuadCore Cupholder by Sprinter Armor
More room for your drinks. A better place for the everyday essentials.
Coffee for the morning. Water for the drive. Drinks for your passenger. QuadCore brings four dedicated drink positions and center storage together in one organized upgrade for your 2019–2026 Mercedes-Benz Sprinter VS30.
Make the space you use every day more useful, whether your van takes you to work, to camp, or across the country. The walkway between the front seats stays open, making it easy to move from the cab to the rear of the van and back.
4
dedicated drink positions
4" & 3.5"
cupholder opening diameters
2 years
limited warranty
01 / Everyday capacity
Coffee and water. Room for both.
One drink is rarely the whole story. You might start with coffee, carry a water bottle for later, and bring drinks for your passenger too. QuadCore gives you four separate positions, so several drinks can have a place at the same time.
Keep your drinks grouped together instead of deciding which one gets the convenient spot. It is a practical improvement you can use on an ordinary commute as well as a full day on the road.
02 / Walk-through access
Keep the walkway. Add the storage.
Move easily from the cab to the back of your van and forward again. QuadCore leaves room to walk between the front seats, so convenient drink storage does not have to take away your access to the rear.
When you are parked, reach the living or cargo area and return to the front without stepping outside. It is a useful advantage for camper builds, work vans, and everyday travel.
03 / Your drinkware
More choice for the bottles you actually use.
The 4-inch larger openings and 3.5-inch smaller openings give you two sizes to work with. Mix compatible bottles and tumblers to suit your routine rather than carrying four identical cups.
Use a larger position for a wider bottle base and a smaller position for suitable slimmer drinkware. Check your container's base diameter when choosing a position; the photos show examples of different containers used together.
04 / Center storage
Give the small things a home, too.
Keys, charging cables, a parking pass, and other small essentials can quickly make a cabin feel cluttered. The recessed center compartment gives those loose items a dedicated place between the drinks.
Bring the things you use most into one organized area. When it is time to park, stop for a break, or get back on the road, you know where to look.
05 / Cup support detail
A closer look inside the cupholder.
The inner support fins provide additional contact points for compatible containers inside the opening. The detail photo shows the supports' shape and how they sit within the cupholder.
Together with the two opening sizes, this gives you more than a flat tray for your drinks: each container has its own defined position. Choose the opening that suits the base and shape of your bottle or tumbler.
06 / Choose your look
Two finishes. The same everyday practicality.
Your cabin should look the way you want it to. Choose a familiar diagonal carbon fiber pattern or a more distinctive faceted finish, with the same four drink positions and center storage in either option.
Carbon Fiber Texture
A classic diagonal pattern for a clean, technical look that complements a dark Sprinter interior.
Forged Carbon Fiber
A faceted carbon-inspired pattern that adds visual depth and makes the center area stand out.
These names describe the surface patterns. Both finishes use PETG Carbon Fiber and TPU95 construction.
07 / Materials & design
Practical storage, with a coordinated finish.
QuadCore uses PETG Carbon Fiber and TPU95 in a design that combines four cupholders with an integrated center compartment. The result brings drink storage and everyday organization into a single cabin accessory.
You get a consistent layout across both finishes and both sliding door configurations. Choose the appearance and fitment that suit your van, while keeping the same useful capacity.
The details before you order
Dimensions & fitment
Make your daily driving space work better for you.
Choose QuadCore if you want room for more drinks, a central home for small essentials, and a finish that coordinates with your Sprinter - while keeping easy access between the front seats and the back of the van. It is one practical upgrade for the part of your van you use on every trip.
Your purchase includes a 2-year limited warranty, with product support from Sprinter Armor. Read the warranty terms below.
***Bottles, tumblers, and other items shown are for demonstration and are not included.
2-Year Limited Warranty
Coverage: Sprinter Armor warrants the QuadCore Cupholder against defects in materials and workmanship under normal, intended vehicle use for two years from the original retail delivery date. Coverage applies to the QuadCore Cupholder and its supplied components throughout that period.
Remedy: For a covered defect, Sprinter Armor will repair or replace the affected component or product at no charge. Refunds under this limited warranty are available only when requested within 14 calendar days after delivery. After this period, covered defects will be resolved through repair or replacement, except where a refund is required by applicable law. Repair or replacement does not restart the original two-year warranty period, except where applicable law requires otherwise.
Exclusions: This warranty does not cover ordinary wear, cosmetic scuffs or scratches that do not affect function, accidental damage, misuse, or damage caused by incorrect installation or alterations. Third-party installation, parts, or service alone do not void coverage; an exclusion applies only to damage they cause.
How to claim: Email customer@sprinterarmor.com with your order number or other proof of purchase, a description of the issue, and photos if available. Sprinter Armor will review the issue and provide the next steps. Contact us before sending the product back so we can arrange any needed inspection or return.
Shipping and fees: Sprinter Armor covers standard shipping needed to resolve an approved warranty claim, including return shipping when required, using the shipping method we arrange. Covered warranty claims have no restocking fee, require no original packaging, and are separate from the store's 30-day return window. Any optional service for a non-covered issue will be quoted for your approval first.
Warranty contact: Sprinter Armor, 7159B Guide Meridian Rd, Lynden, WA 98264, United States. Email: customer@sprinterarmor.com.
Your rights: This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. It adds to, and does not remove, rights or remedies that applicable law does not allow us to limit. The separate spill disclaimer does not reduce this warranty.
CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Disclaimer
Spill Risk & Liability Disclaimer
The QuadCore Cupholder organizes compatible drink containers but does not guarantee against tipping, leaking, or spilling. Spilled liquids may cause burns, personal injury, or damage to vehicle interiors, electronics, and other property.
Use properly fitting containers with securely closed lids. Avoid open or overfilled drinks, and exercise extra care with hot liquids. Check that containers are seated properly before driving. Stop safely before adjusting containers or cleaning spills.
To the fullest extent permitted by applicable law, Sprinter Armor is not liable for damage, injury, cleaning costs, repair costs, or other losses resulting from beverage spills or leaks during use of the QuadCore Cupholder.
Nothing in this notice excludes liability that cannot legally be excluded, limits your statutory consumer rights, or reduces the product’s 2-year limited warranty.
All SprinterArmor products are designed and built in small batches at our shop.
Processing time: 1–5 business days
Shipping: Free shipping on all orders within the United States
Carriers: UPS
Delivery time: Typically 3–4 business days after shipment
Tracking information is provided once your order ships
During high-demand periods or product launches, processing times may be slightly longer. Any extended lead times will be clearly noted on the product page.
Returns
We accept returns within 30 days of delivery under the following conditions:
The item must be unused and uninstalled
Item must be returned in its original condition
All original hardware and packaging must be included
To initiate a return, please contact us first:
📧 support@sprinterarmor.com
Installed, used, modified, or custom items are not eligible for return.
Refunds
Approved refunds are issued to the original payment method
Refunds are processed within 5–7 business days after inspection
Return shipping costs are the responsibility of the customer unless the return is due to a manufacturing defect or our error
Warranty
Every SprinterArmor product includes a lifetime hassle-free warranty against manufacturing defects.
If a product fails due to materials or workmanship, we will repair or replace it.
Warranty does not cover normal wear, improper installation, or misuse.
RECENTLY VIEWED PRODUCTS